Radium Engineering Dual AEM 50-1000 Fuel Surge Tank (Pumps Not Incl)
A fuel surge tank (FST) is designed to prevent fuel starvation to the engine on vehicles with inadequate fuel tank baffling. The FST fuel pump(s) directly feed the fuel rail(s). The volume of fuel inside the surge tank acts as a buffer to always keep the FST pump supplied with fuel. This volume is maintained by the main fuel tank's pump as well as the fuel returning from the fuel pressure regulator. Excess fuel in the surge tank is returned back to the vehicle's main fuel tank. The surge tank also provides a quick and easy way to upgrade any standard fuel system without the need to modify the stock fuel tank or pump. This is an excellent fueling solution for vehicles installing large fuel demand power upgrades such as forced induction. *All Fuel Surge Tanks Include:* * Extruded and Machined Aluminum 1.5 Liter Canister * Bright Dipped Anodized and Laser Engraved Housing * Removable O-Ring Sealed Billet Aluminum Caps * -6AN Male Feed and Return O-Ring Port Fittings * Nickel Plated Electrical Connector with 24" Flying Leads * Corrosive Resistant Stainless Steel Hardware * Extra O-rings For Servicing All pumps mount internally using gasoline, ethanol, and methanol resistant wiring. For dual-pump configurations, each pump is wired independently. All hoses are submersible and E85 safe. The pump outlet fitting(s) are available in -6AN male size only (shown in green). The other ports can be adapted to other -AN sizes using adapters (sold separately). *How to Select Your Fuel Surge Tank Configuration* Determine if your application will require one or two pumps. This is based on determining how much fuel flow the engine will need. Next, decide if the pump(s) will be purchased through Radium Engineering (pump included) or elsewhere (pump not included). Use the drop-down menu to make your selection. NOTE: When pump(s) are included, the FST comes fully assembled and is ready to be installed in the vehicle. When purchasing without pumps, use the included instructions to aid in the assembly. Next, select the fuel pump model that will be used from the options shown. *Walbro GSS342 255LPH Pump* This FST can be configured for single or dual pumps. *Walbro F90000262 Gas Pump* This surge tank comes in a single pump version only. * Walbro F90000267 E85 Pump* This surge tank comes in a single pump version only. *AEM 50-1000 Gas Pump* This FST can be configured for single or dual pumps. *AEM 50-1200 E85 Pump* This FST can be configured for single or dual pumps. *Deatschwerks 9-301-1000 Pump* This FST can be configured for single or dual Deatschwerks pumps. *Aeromotive 11142 Pump* This FST can be configured for single or dual pumps. *Bosch 0 580 254 044 Pump* This surge tank comes in a single pump version only.