Cart 0
88-91 CIVIC/CRX (USDM) PRO-SERIES COMPETITION TRACTION BAR KIT (STOCK D-SERIES / B-SERIES SWAP)
88-91 CIVIC/CRX (USDM) PRO-SERIES COMPETITION TRACTION BAR KIT (STOCK D-SERIES / B-SERIES SWAP)
88-91 CIVIC/CRX (USDM) PRO-SERIES COMPETITION TRACTION BAR KIT (STOCK D-SERIES / B-SERIES SWAP)
88-91 CIVIC/CRX (USDM) PRO-SERIES COMPETITION TRACTION BAR KIT (STOCK D-SERIES / B-SERIES SWAP)
88-91 CIVIC/CRX (USDM) PRO-SERIES COMPETITION TRACTION BAR KIT (STOCK D-SERIES / B-SERIES SWAP)
88-91 CIVIC/CRX (USDM) PRO-SERIES COMPETITION TRACTION BAR KIT (STOCK D-SERIES / B-SERIES SWAP)
88-91 CIVIC/CRX (USDM) PRO-SERIES COMPETITION TRACTION BAR KIT (STOCK D-SERIES / B-SERIES SWAP)

88-91 CIVIC/CRX (USDM) PRO-SERIES COMPETITION TRACTION BAR KIT (STOCK D-SERIES / B-SERIES SWAP)

Description

Competition/Traction Bar Kit for the USDM 1988-1991 Honda Civic/CRX (ED/EE/EF)
Designed to replace the stock crossmember of the Domestic(USDM) Civic/CRX ED/EE/EF chassis that came stock with D-Series engines.

  • Adjustable End Links
  • Built-In Tow Hooks
  • Lighter and Stronger than OEM
  • Works with both A/T & M/T cars
  • Works with B-Series Swaps
  • Gives Extra Front Clearance
  • Clears All Factory Headers
  • Enhances Vehicle Rigidity and Overall Driving Accuracy
  • Lifetime Warranty 

The INNOVATIVE MOUNTS Competition/Traction Bar Kit is designed to increase the rigidity and stability of a vehicle's front suspension. 
Wheel-hop is reduced by connecting the front lower control arms to the frame. The PRO-SERIES boxed cross member not only increases frame and suspension rigidity, it also reduces the ahead of the front axle

The PRO-SERIES traction bar kit is laser cut, precision welded and powder-coated for durable, corrosion resistant finish. Each billet aluminum radius arm is equipped with a race grade heim/spherical joint allowing for an OEM fit that is adjustable to suit all vehicle setups. High-strength heims and radius arms reduce the unwanted movement that can cause changes in suspension geometry during high-speed cornering or launching.

The Comp/Traction bar will work with engine swaps and can be used with full or half sized radiators. Due to its slim design, it will also accept the use of larger down pipes and manifolds.

- H22A swaps may require additional modification to be used with this comp/traction Bar.

NOTE:
It is strongly recommended that all installs be done by a mechanic or automotive specialist. 
Mounts CAN NOT be returned or swapped out after they have been bolted down (revealing bolt impressions). 
PLEASE MAKE SURE THIS KIT FITS YOUR VEHICLE BEFORE BOLTING THEM IN PLACE.
Innovative Engine Mounts are built for performance driving. 
Although Innovative's bushings are made to absorb engine vibration, you may still notice slight vibration depending on your engine's series and HP. 
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock mounts. 
By switching to stiffer mounts without the fluid reduces wheel hop and increases driving response. 

Part #: 96350

We Also Recommend

K-TUNED FRONT CAMBER KIT UPPER CONTROL ARMS RUBBER BUSHINGS 92-95 HONDA CIVIC EG

K-TUNED FRONT CAMBER KIT UPPER CONTROL ARMS RUBBER BUSHINGS 92-95 HONDA CIVIC EG
K-Tuned Billet RSX Shifter Base Plate for Integra DC2 94-01 Civic EF EG EK 88-00

K-Tuned Billet RSX Shifter Base Plate for Integra DC2 94-01 Civic EF EG EK 88-00
K-Tuned Rear Camber Kit 02-06 Acura RSX 01-05 Honda Civic - KTD-RUR-106

K-Tuned Rear Camber Kit 02-06 Acura RSX 01-05 Honda Civic - KTD-RUR-106
K-Tuned Complete Spherical Tie Rod Set 02-06 Acura RSX / 01-05 Civic - KTD-TRO-RCE

K-Tuned Complete Spherical Tie Rod Set 02-06 Acura RSX / 01-05 Civic - KTD-TRO-RCE
K-Tuned Front Camber Kit 96-00 Honda Civic EK - KTD-FUR-960

K-Tuned Front Camber Kit 96-00 Honda Civic EK - KTD-FUR-960