{"title":"K-Tuned","description":"","products":[{"product_id":"k-tuned-k-series-engine-throttle-body-heatshield-gasket-oem-prb-intake-manifold-ktg-prb-tb","title":"K-TUNED K-SERIES ENGINE THROTTLE BODY HEATSHIELD GASKET OEM PRB INTAKE MANIFOLD KTG-PRB-TB","description":"\u003cp\u003eMake a little more power with K-Tuned Intake Manifold and  Throttlebody Heatshield Gaskets. Our intake and throttle body heat  shield gaskets are manufactured with a high grade temperature insulating plastic. They are precision cut and designed to replace the listed oem  gaskets. By insulating the intake and throttle body from the engine  heat, it will decrease the intake air temperature, and increase  horsepower! \u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eSo I guess you want to know how  they work? The cylinder head gets quite hot when your engine is running. The purpose of these gaskets is to break the transfer of heat between  the cylinder head and the intake manifold and throttlebody to create  lower incoming air temps. As air heats up, it's density drops, reducing  oxygen content, robbing you of power because your ecu has to compensate  with less fuel. On average, you lose about 1% of density for every 5  degrees farenheit of increased temp! \u003c\/div\u003e\n\u003cdiv\u003eHeatsoak is a thing of the past when you get one of these installed on your motor. \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eAn added bonus is these gaskets are also re-usable. So you won't have to  buy expensive oem Honda gaskets whenever you do some work on your car.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePart\u003c\/strong\u003e #: KTG-PRB-TB\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: 02-04 RSX-S \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eNotes: Does not fit 05-06 RSX-S without modification\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015506553,"sku":"KTG-PRB-TB","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/57_3_87943393-252e-471f-8932-54a1ab36e424.JPG?v=1504755532"},{"product_id":"k-tuned-high-pressure-rad-radiator-cap-integra-civic-rsx-k20-b18-d16-more-ktd-rc2-13b","title":"K-Tuned High Pressure Rad \/ Radiator Cap Integra Civic RSX (K20 B18 D16 \u0026 More) KTD-RC2-13B","description":"\u003cstrong\u003eApplications: \u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eK-Tuned Upper Coolant Housing Filler Necks\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1994 - 2001 Integra (All Models)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2002 - 2006 Acura RSX (All Models)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2004 - 2008 Acura TSX (Base)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1990 - 1997 Honda Accord (DX, EX, LX)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1991 - 1993 Honda Accord (SE)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1993 - 2010 Honda Civic Coupe (DX, EX)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2001 - 2010 Honda Civic Coupe (LX)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1999 - 2010 Honda Civic Coupe (Si)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1996 - 2005 Honda Civic Coupe (HX)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1992 - 2000 Honda Civic Hatchback (CX, DX)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1992 - 2005 Honda Civic Hatchback (Si)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1992 - 1995 Honda Civic Hatchback (VX)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1992 - 2010 Honda Civic Sedan (DX, EX, LX)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2007 - 2010 Honda Civic Sedan (Si)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1998 - 2004 Honda Civic Sedan (GX)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1993 - 1997 Honda del Sol (All Models)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2003 - 2008 Honda Element (All Models)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2007 - 2008 Honda Fit (Base \u0026amp; Sport)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: This does not fit our K-Tuned Pass Side Rad.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e Our high pressure caps increase the system pressure before opening from 1.1 to 1.3 kg\/cm. This effectively raises the boiling point of the coolant which in turn improves overall cooling performance.  \u003c\/span\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015507753,"sku":"KTD-RC2-13B","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/ktd-rc2-13b-7c3c622f7e2408fd9471f0967e7e43cebda88c63.png?v=1769027060"},{"product_id":"k-tuned-fuel-pressure-gauge-black-marshall-0-100-psi-universal-kfr-fpg-b55","title":"K-Tuned Fuel Pressure Gauge (BLACK) Marshall 0-100 psi UNIVERSAL KFR-FPG-B55","description":"\u003cp data-start=\"359\" data-end=\"432\"\u003e\u003cstrong data-start=\"359\" data-end=\"432\"\u003eK-Tuned Fuel Pressure Gauge – Black | 0-100 PSI | Marshall Shockproof\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"434\" data-end=\"689\"\u003eThis \u003cstrong data-start=\"439\" data-end=\"470\"\u003eK-Tuned Fuel Pressure Gauge\u003c\/strong\u003e is built by \u003cstrong data-start=\"483\" data-end=\"507\"\u003eMarshall Instruments\u003c\/strong\u003e, a trusted name in performance monitoring. Designed in sleek \u003cstrong data-start=\"569\" data-end=\"582\"\u003eall-black\u003c\/strong\u003e with the \u003cstrong data-start=\"592\" data-end=\"634\"\u003eK-Tuned logo laser-etched on the bezel\u003c\/strong\u003e, this gauge offers unmatched durability and precision.\u003c\/p\u003e\n\u003cp data-start=\"691\" data-end=\"879\"\u003ePerfect for \u003cstrong data-start=\"703\" data-end=\"723\"\u003eK-series engines\u003c\/strong\u003e and \u003cstrong data-start=\"728\" data-end=\"754\"\u003euniversal applications\u003c\/strong\u003e, this gauge reads from \u003cstrong data-start=\"778\" data-end=\"794\"\u003e0 to 100 PSI\u003c\/strong\u003e, allowing you to dial in your fuel pressure for maximum performance and reliability.\u003c\/p\u003e\n\u003chr data-start=\"881\" data-end=\"884\"\u003e\n\u003ch3 data-start=\"886\" data-end=\"909\"\u003e✅ \u003cstrong data-start=\"892\" data-end=\"909\"\u003eKey Features:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-start=\"911\" data-end=\"1304\"\u003e\n\u003cli data-start=\"911\" data-end=\"956\"\u003e\n\u003cp data-start=\"913\" data-end=\"956\"\u003eBrand: \u003cstrong data-start=\"920\" data-end=\"954\"\u003eK-Tuned \/ Marshall Instruments\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"957\" data-end=\"999\"\u003e\n\u003cp data-start=\"959\" data-end=\"999\"\u003eStyle: \u003cstrong data-start=\"966\" data-end=\"997\"\u003eAll-Black with K-Tuned Logo\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1000\" data-end=\"1033\"\u003e\n\u003cp data-start=\"1002\" data-end=\"1033\"\u003ePressure Range: \u003cstrong data-start=\"1018\" data-end=\"1031\"\u003e0-100 PSI\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1034\" data-end=\"1103\"\u003e\n\u003cp data-start=\"1036\" data-end=\"1103\"\u003eLiquid-Filled: \u003cstrong data-start=\"1051\" data-end=\"1101\"\u003eReduces needle vibration at idle and high RPMs\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1104\" data-end=\"1172\"\u003e\n\u003cp data-start=\"1106\" data-end=\"1172\"\u003e\u003cstrong data-start=\"1106\" data-end=\"1120\"\u003eShockproof\u003c\/strong\u003e Design – Handles engine vibration without failure\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1173\" data-end=\"1202\"\u003e\n\u003cp data-start=\"1175\" data-end=\"1202\"\u003eThread Size: \u003cstrong data-start=\"1188\" data-end=\"1200\"\u003e1\/8\" NPT\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1203\" data-end=\"1262\"\u003e\n\u003cp data-start=\"1205\" data-end=\"1262\"\u003e\u003cstrong data-start=\"1205\" data-end=\"1226\"\u003eUniversal fitment\u003c\/strong\u003e for most aftermarket fuel systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1263\" data-end=\"1304\"\u003e\n\u003cp data-start=\"1265\" data-end=\"1304\"\u003eMade in USA by \u003cstrong data-start=\"1280\" data-end=\"1304\"\u003eMarshall Instruments\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1306\" data-end=\"1309\"\u003e\n\u003ch3 data-start=\"1311\" data-end=\"1338\"\u003e⚠️ \u003cstrong data-start=\"1318\" data-end=\"1338\"\u003eImportant Notes:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-start=\"1340\" data-end=\"1505\"\u003e\n\u003cli data-start=\"1340\" data-end=\"1369\"\u003e\n\u003cp data-start=\"1342\" data-end=\"1369\"\u003e\u003cstrong data-start=\"1342\" data-end=\"1367\"\u003eFittings NOT included\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1370\" data-end=\"1437\"\u003e\n\u003cp data-start=\"1372\" data-end=\"1437\"\u003eRequires compatible fuel rail or adapter with \u003cstrong data-start=\"1418\" data-end=\"1435\"\u003e1\/8\" NPT port\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1438\" data-end=\"1505\"\u003e\n\u003cp data-start=\"1440\" data-end=\"1505\"\u003eFor fuel pressure monitoring only – do not use for oil or coolant\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1507\" data-end=\"1510\"\u003e\n\u003ch3 data-start=\"1512\" data-end=\"1536\"\u003e\u003c\/h3\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015508469,"sku":"KFR-FPG-B55","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/kfr-fpg-b55-0552ed80cd647de4d2fc793ebd02c65ee43572aa.png?v=1769030910"},{"product_id":"k-tuned-inline-universal-fuel-filter-6an-ktd-ff-06-e-85-compatible","title":"K-Tuned Inline (UNIVERSAL) Fuel Filter -6AN KTD-FF-06 E-85 Compatible","description":"\u003cp\u003e\u003cspan\u003eOur 40 micron Inline fuel filter can be used universally.  Can be disassembled for cleaning which is recommend every year depending on how much the car is driven.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eApplications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAll K-series engines, Universal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015509089,"sku":"KTD-FF-06","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/ktd-ff-06-a7d592022d4df76b25f98bdf4cca7fcb076738ec.png?v=1769028053"},{"product_id":"k-tuned-inline-universal-fuel-filter-8an-ktd-ff-08","title":"K-Tuned Inline (UNIVERSAL) Fuel Filter -8AN KTD-FF-08","description":"\u003cp data-start=\"292\" data-end=\"381\"\u003e\u003cstrong data-start=\"292\" data-end=\"381\"\u003eK-Tuned Inline Fuel Filter –8AN | E85 Compatible | Universal Fit for K-Series Engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"383\" data-end=\"728\"\u003eProtect your fuel system and fuel injectors with the \u003cstrong data-start=\"436\" data-end=\"466\"\u003eK-Tuned Inline Fuel Filter\u003c\/strong\u003e, engineered to deliver clean, reliable fuel flow for any performance build. Featuring a cleanable \u003cstrong data-start=\"565\" data-end=\"609\"\u003e30-micron stainless steel filter element\u003c\/strong\u003e, this inline filter ensures contaminants don’t reach your injectors or fuel pump, enhancing reliability and longevity.\u003c\/p\u003e\n\u003chr data-start=\"730\" data-end=\"733\"\u003e\n\u003cp data-start=\"735\" data-end=\"755\"\u003e🔧 \u003cstrong data-start=\"738\" data-end=\"755\"\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"757\" data-end=\"1286\"\u003e\n\u003cli data-start=\"757\" data-end=\"841\"\u003e\n\u003cp data-start=\"759\" data-end=\"841\"\u003eCompatible with \u003cstrong data-start=\"775\" data-end=\"794\"\u003e-8AN fuel lines\u003c\/strong\u003e, ideal for most high-performance fuel setups\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"842\" data-end=\"919\"\u003e\n\u003cp data-start=\"844\" data-end=\"919\"\u003eFully \u003cstrong data-start=\"850\" data-end=\"868\"\u003eE85 compatible\u003c\/strong\u003e, safe for use with ethanol blends and race fuels\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"920\" data-end=\"1005\"\u003e\n\u003cp data-start=\"922\" data-end=\"1005\"\u003eUniversal design works with \u003cstrong data-start=\"950\" data-end=\"974\"\u003eall K-Series engines\u003c\/strong\u003e and many custom applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1006\" data-end=\"1101\"\u003e\n\u003cp data-start=\"1008\" data-end=\"1101\"\u003eDurable stainless steel filter element is \u003cstrong data-start=\"1050\" data-end=\"1076\"\u003ecleanable and reusable\u003c\/strong\u003e, extending filter life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1102\" data-end=\"1184\"\u003e\n\u003cp data-start=\"1104\" data-end=\"1184\"\u003eCompact size for easy installation in tight engine bays or custom fuel systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1185\" data-end=\"1286\"\u003e\n\u003cp data-start=\"1187\" data-end=\"1286\"\u003eHelps prevent clogs and wear on fuel injectors and pumps, improving overall fuel system performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1288\" data-end=\"1291\"\u003e\n\u003cp data-start=\"1293\" data-end=\"1316\"\u003e📦 \u003cstrong data-start=\"1296\" data-end=\"1316\"\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1318\" data-end=\"1368\"\u003e\n\u003cli data-start=\"1318\" data-end=\"1368\"\u003e\n\u003cp data-start=\"1320\" data-end=\"1368\"\u003eK-Tuned Inline Fuel Filter – Model \u003cstrong data-start=\"1355\" data-end=\"1368\"\u003eKTD-FF-08\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1370\" data-end=\"1373\"\u003e\n\u003cp data-start=\"1375\" data-end=\"1395\"\u003e🚗 \u003cstrong data-start=\"1378\" data-end=\"1395\"\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1397\" data-end=\"1589\"\u003e\n\u003cli data-start=\"1397\" data-end=\"1436\"\u003e\n\u003cp data-start=\"1399\" data-end=\"1436\"\u003eFits \u003cstrong data-start=\"1404\" data-end=\"1434\"\u003eall Honda K-Series engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1437\" data-end=\"1516\"\u003e\n\u003cp data-start=\"1439\" data-end=\"1516\"\u003eCompatible with custom and aftermarket fuel systems requiring -8AN fittings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1517\" data-end=\"1589\"\u003e\n\u003cp data-start=\"1519\" data-end=\"1589\"\u003eIdeal for street, track, and race builds running gasoline or E85 fuels\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1591\" data-end=\"1594\"\u003e\n\u003cp data-start=\"1596\" data-end=\"1636\"\u003e🛠️ \u003cstrong data-start=\"1600\" data-end=\"1636\"\u003eWhy Choose K-Tuned Fuel Filters?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1638\" data-end=\"1912\"\u003eK-Tuned is trusted for high-quality Honda and performance parts. This inline fuel filter offers a perfect balance of durability, filtration efficiency, and versatility for daily drivers or race vehicles, keeping your fuel system clean and reliable no matter the application.\u003c\/p\u003e\n\u003chr data-start=\"1914\" data-end=\"1917\"\u003e\n\u003cp data-start=\"1919\" data-end=\"2034\"\u003e🚚 \u003cstrong data-start=\"1922\" data-end=\"1939\"\u003eFast Shipping\u003c\/strong\u003e | 🛡️ \u003cstrong data-start=\"1946\" data-end=\"1978\"\u003e100% Genuine K-Tuned Product\u003c\/strong\u003e | 💬 \u003cstrong data-start=\"1984\" data-end=\"2034\"\u003eMessage us for fitment or installation support\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr data-start=\"2036\" data-end=\"2039\"\u003e\n\u003cp data-start=\"2041\" data-end=\"2207\"\u003eEnsure your fuel system stays clean and your engine runs smoothly with the K-Tuned Inline Fuel Filter – a compact, high-performance solution for K-Series enthusiasts.\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015509701,"sku":"KTD-FF-08","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/57_695626c9-f299-475d-9f57-d18d99bf917d.JPG?v=1504755508"},{"product_id":"k-tuned-intake-manifold-gaskets-honda-acura-rsx-k20a-k20a2-prb-ktg-prb-man","title":"K-Tuned Intake Manifold Gaskets Honda Acura RSX K20A K20A2 PRB KTG-PRB-MAN","description":"\u003cp data-start=\"243\" data-end=\"344\"\u003e\u003cstrong data-start=\"243\" data-end=\"322\"\u003eK-Tuned Intake Manifold Gasket for Honda Acura RSX K20A \/ K20A2 PRB Engines\u003c\/strong\u003e\u003cbr data-start=\"322\" data-end=\"325\"\u003e Part #: KTG-PRB-MAN\u003c\/p\u003e\n\u003cp data-start=\"346\" data-end=\"660\"\u003eUpgrade your RSX’s performance with the \u003cstrong data-start=\"386\" data-end=\"420\"\u003eK-Tuned Intake Manifold Gasket\u003c\/strong\u003e, precision-engineered to replace OEM gaskets and reduce intake air temperatures by insulating the intake manifold and throttle body from engine heat. Lower intake temperatures mean denser air, improved combustion, and increased horsepower.\u003c\/p\u003e\n\u003chr data-start=\"662\" data-end=\"665\"\u003e\n\u003ch3 data-start=\"667\" data-end=\"686\"\u003eKey Features:\u003c\/h3\u003e\n\u003cul data-start=\"687\" data-end=\"1190\"\u003e\n\u003cli data-start=\"687\" data-end=\"815\"\u003e\n\u003cp data-start=\"689\" data-end=\"815\"\u003e\u003cstrong data-start=\"689\" data-end=\"709\"\u003eHeat Insulation:\u003c\/strong\u003e Reduces heat soak by blocking heat transfer between the cylinder head and intake manifold\/throttle body\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"816\" data-end=\"928\"\u003e\n\u003cp data-start=\"818\" data-end=\"928\"\u003e\u003cstrong data-start=\"818\" data-end=\"843\"\u003eImproves Performance:\u003c\/strong\u003e Cooler intake air increases air density, improving oxygen content and power output\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"929\" data-end=\"1035\"\u003e\n\u003cp data-start=\"931\" data-end=\"1035\"\u003e\u003cstrong data-start=\"931\" data-end=\"951\"\u003eReusable Design:\u003c\/strong\u003e Durable gasket can be reused, saving you money on replacements during maintenance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1036\" data-end=\"1126\"\u003e\n\u003cp data-start=\"1038\" data-end=\"1126\"\u003e\u003cstrong data-start=\"1038\" data-end=\"1056\"\u003ePrecision Cut:\u003c\/strong\u003e Perfect fit for Honda\/Acura RSX K20A and K20A2 PRB intake manifolds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1127\" data-end=\"1190\"\u003e\n\u003cp data-start=\"1129\" data-end=\"1190\"\u003e\u003cstrong data-start=\"1129\" data-end=\"1148\"\u003eSimple Upgrade:\u003c\/strong\u003e Easy installation without modifications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1192\" data-end=\"1195\"\u003e\n\u003ch3 data-start=\"1197\" data-end=\"1218\"\u003eWhy It Matters:\u003c\/h3\u003e\n\u003cp data-start=\"1219\" data-end=\"1502\"\u003eAs intake air temperature rises, air density drops about 1% for every 5°F increase, resulting in less oxygen and reduced power. By installing this gasket, you significantly reduce heat soak, helping your engine breathe cooler, denser air for better performance and throttle response.\u003c\/p\u003e\n\u003chr data-start=\"1504\" data-end=\"1507\"\u003e\n\u003ch3 data-start=\"1509\" data-end=\"1528\"\u003eApplications:\u003c\/h3\u003e\n\u003cul data-start=\"1529\" data-end=\"1680\"\u003e\n\u003cli data-start=\"1529\" data-end=\"1567\"\u003e\n\u003cp data-start=\"1531\" data-end=\"1567\"\u003eAcura RSX K20A PRB Intake Manifold\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1568\" data-end=\"1607\"\u003e\n\u003cp data-start=\"1570\" data-end=\"1607\"\u003eAcura RSX K20A2 PRB Intake Manifold\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1608\" data-end=\"1680\"\u003e\n\u003cp data-start=\"1610\" data-end=\"1680\"\u003eCompatible with other Honda K20A variants using PRB intake manifolds\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1682\" data-end=\"1685\"\u003e\n\u003ch3 data-start=\"1687\" data-end=\"1815\"\u003eUpgrade your RSX with K-Tuned’s Intake Manifold Gasket — maximize power with cooler intake air and superior heat insulation!\u003c\/h3\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015511329,"sku":"KTG-PRB-MAN","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/T2eC16R_zoFJNoe9QtFBScVGEj_g_60_57.JPG?v=1619647659"},{"product_id":"k-tuned-intake-manifold-gasket-honda-acura-k24a2-k20z3-ktg-k24-man","title":"K-Tuned Intake Manifold Gasket Honda Acura K24A2 K20Z3 KTG-K24-MAN","description":"\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003ePrecision cut and designed to replace the listed oem gaskets. By insulating the intake and throttle body from the engine heat, it will decrease the intake air temperature, and increase horsepower.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eThe purpose of these gaskets is to break the transfer of heat between the cylinder head and the intake manifold and throttle body to create lower incoming air temps. As air heats up, it's density drops, reducing oxygen content, robbing you of power because your ecu has to compensate with less fuel. On average, you lose about 1% of density for every 5 degrees Fahrenheit of increased temp.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eHeat soak is a thing of the past when you get one of these installed on your motor. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eAn added bonus is these gaskets are also re-usable. So you won't have to buy expensive OEM Honda gaskets whenever you do some work on your car.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e\u003cstrong\u003ePart\u003c\/strong\u003e #: KTG-K24-MAN\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eApplications:\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eAcura\/Honda K24A2 K20Z3 Intake Manifolds\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015514821,"sku":"KTG-K24-MAN","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/KGrHqJHJCIFJZWugbPWBScVs8CqHw_60_57.JPG?v=1618241268"},{"product_id":"k-tuned-k-series-iacv-rotation-plate-ktd-iac-rot","title":"K-TUNED K-SERIES IACV ROTATION PLATE KTD-IAC-ROT","description":"\u003cp\u003e\u003cspan\u003eK-Tuned has now developed a very useful part to relocate the Idle Air Control Valve (IACV) on the K-series engine.  If you have ever looked closely at the location of the IACV motor assembly you may have noticed that it is always seems to get in the way of the intake piping or the radiator on swapped cars.  This part is designed to rotate the IACV sensor out of the way giving some much needed clearance for K-swaps.   The IACV plays a critical role in idle quality and stability.  Many K-swaps will suffer from high idle or surging issues when they are first started.  Most of the time the part causing the issue is the IACV.  Excess carbon build-up in the valve can cause sticking.  This is why we have also taken the time to create some detailed instructions on how to clean your IACV.   You might have seen IACV block off plates on the market.  These are not always the best solution to IACV problems because after installation the idle rpm is too low.  Idling at 350 - 450 rpm with a simple block off plate is out of oem spec and causes frequent stalling.  The fix for this is to manually open up the throttle plate to raise the idle.  This done by adjusting the factory set throttle stop.  This is why we always recommend cleaning and keeping the IACV in place just as Honda intended.  There are some exceptions such as race engines where idle performance is not a big concern.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePart\u003c\/strong\u003e # KTD-IAC-ROT\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e: All cable driven K-series throttlebodies with IACV motor\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e  \u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015515601,"sku":"KTD-IAC-ROT","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/57_4647ef52-1b46-45c8-ad66-8ad0dc744c80.JPG?v=1619642648"},{"product_id":"k-tuned-b-series-tps-adapter-ktd-tps-bsa-ktd-tps-bsa","title":"K-Tuned B-Series TPS Adapter KTD-TPS-BSA","description":"\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cspan\u003e K20A\/A2 and Z1 throttle body or K20A3 throttle body only from the Honda EP3. It also fits several aftermarket throttle bodies.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e Adapter must be used with a Honda MPFI (Multi  Point Fuel Injection) J3TR60659 TPS sensor. Also note that this sensor  is found on several Honda models ranging in year from 1988 to 2001.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe recently decided it was time to offer our customers another option to help solve the TPS problem that continues to plague some K-Series  owners. The K-Tuned B-Series TPS Adapter is a simple 2 piece adapter  that makes it possible to use a 1988 to 2001 B-Series TPS on the RSX  Type-S style K-Series throttle body. Note that this adapter can also be  used on several aftermarket TB's as long as they were originally  designed for the standard Type-S TPS. The mounting holes on both the K  and B TPS are identical, so mounting is very simple using a billet  aluminum spacer. For the actual shaft to arm conversion, we designed a  small round adapter that bolts to the shaft of the K throttle body with a set screw. This adapter piece has two posts on it that will hold the  arm on the B-Series TPS. For wiring, we provide a female K-Series TPS  plug and 3 terminals to connect to the B-Series TPS plug that is cut off the old engine harness. The idea here is to make an adapter so that you will not need to cut your K-Series engine harness. All that's left is  calibration, which is just like all Honda TPS sensors, set the reading  to 0.475 volts closed and the wide open reading should be approximately  4.5 volts. Our kit includes the 2 piece adapter, female TPS plug, 3  terminals and stainless steel hardware.\u003c\/span\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015518321,"sku":"KTD-TPS-BSA","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/15462074876082.jpg?v=1766112545"},{"product_id":"k-tuned-bolt-on-radiator-bracket-ek-dc2-w-rsx-full-size-radiator-bor-fr-rsx-bor-fr-rsx","title":"K-TUNED BOLT-ON RADIATOR BRACKET EK DC2 W\/ RSX FULL SIZE RADIATOR BOR-FR-RSX","description":"\u003cp\u003eThese rad brackets are designed to use the factory DC2 lower brackets and a full RSX\/EP3 radiator when doing a swap or our provided lower brackets with well nuts. The stainless steel rad stays come with grommets and the hardware needed. No more zip-ties or ugly rad stays for DC2\/EK owners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #: \u003c\/strong\u003eBOR-FR-RSX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e: EK \/ DC2 w\/full RSX\/EP3 Radiator     \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015556629,"sku":"BOR-FR-RSX","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/7426015341.jpg?v=1766112546"},{"product_id":"k-tuned-billet-shift-knob-black-for-honda-acura-k-series-b-series-ktd-sft-knb","title":"K-Tuned Billet Shift Knob Black for Honda Acura K Series B Series - KTD-SFT-KNB","description":"\u003cdiv\u003e\u003cspan\u003eThe K-Tuned Billet Shift Knob is the result of quite a bit of customer and racer feedback. We already offer several K-Series shifter upgrades so it was definitely time for us to develop a clean and functional shift knob. The process begins with a solid billet bar of 6061 aluminum, and each knob is machined to final size on a CNC lathe. After the lathe, the blank knobs are sent out for the anodizing process. The black is hard anodized and the silver is a regular anodize. During the final step, each knob is chucked up on a 4-Axis CNC mill to precision cut in the unique grid pattern that was designed to improve shifter grip. This final step is so critical that we actually have a 5% scrap rate. On cable shifter setup we found that a weighted knob can cause shifting problems for some drivers because the neutral return spring has to work harder to pull the shifter back to the center. So instead of going to the heavy side we found a good weight (5.5 oz) that is just enough to allow confident and accurate shifting while still keeping enough weight to help the front to back shifts. Shift knobs are finished in your choice of black or silver with our K-Tuned logo on two sides.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003ePart\u003c\/strong\u003e # \u003cspan id=\"product_id\"\u003e KTD-SFT-KNB\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cb\u003eApplication's:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003e\u003cspan\u003e\u003cb\u003eAll Honda models\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003e\u003cspan\u003e\u003cb\u003eAll Acura models\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015558597,"sku":"KTD-SFT-KNB","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/21035608735922.jpg?v=1766112550"},{"product_id":"k-tuned-billet-shift-knob-silver-ktd-sft-kns","title":"K Tuned Billet Shift Knob Silver","description":"\u003cdiv\u003e\u003cspan\u003eThe K-Tuned Billet Shift Knob is the result of quite a bit of customer and racer feedback. We already offer several K-Series shifter upgrades so it was definitely time for us to develop a clean and functional shift knob. The process begins with a solid billet bar of 6061 aluminum, and each knob is machined to final size on a CNC lathe. After the lathe, the blank knobs are sent out for the anodizing process. The black is hard anodized and the silver is a regular anodize. During the final step, each knob is chucked up on a 4-Axis CNC mill to precision cut in the unique grid pattern that was designed to improve shifter grip. This final step is so critical that we actually have a 5% scrap rate. On cable shifter setup we found that a weighted knob can cause shifting problems for some drivers because the neutral return spring has to work harder to pull the shifter back to the center. So instead of going to the heavy side we found a good weight (5.5 oz) that is just enough to allow confident and accurate shifting while still keeping enough weight to help the front to back shifts. Shift knobs are finished in your choice of black or silver with our K-Tuned logo on two sides.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePart\u003c\/strong\u003e # \u003cspan id=\"product_id\"\u003eKTD-SFT-KNS\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cb\u003eApplication's:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003eAll Honda models\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003eAll Acura models\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015561117,"sku":"KTD-SFT-KNS","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/20838929596594.jpg?v=1766112549"},{"product_id":"k-tuned-billet-function-form-shift-knob-blue-ktd-sft-knbl","title":"K Tuned Billet Function Form Shift Knob Blue KTD-SFT-KNBL","description":"\u003cdiv\u003e\u003cspan\u003eThe K-Tuned Billet Shift Knob is the result of quite a bit of customer and racer feedback. We already offer several K-Series shifter upgrades so it was definitely time for us to develop a clean and functional shift knob. The process begins with a solid billet bar of 6061 aluminum, and each knob is machined to final size on a CNC lathe. After the lathe, the blank knobs are sent out for the anodizing process. The black is hard anodized and the silver is a regular anodize. During the final step, each knob is chucked up on a 4-Axis CNC mill to precision cut in the unique grid pattern that was designed to improve shifter grip. This final step is so critical that we actually have a 5% scrap rate. On cable shifter setup we found that a weighted knob can cause shifting problems for some drivers because the neutral return spring has to work harder to pull the shifter back to the center. So instead of going to the heavy side we found a good weight (5.5 oz) that is just enough to allow confident and accurate shifting while still keeping enough weight to help the front to back shifts. Shift knobs are finished in your choice of black or silver with our K-Tuned logo on two sides.\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003ePart\u003c\/strong\u003e # \u003cspan id=\"product_id\"\u003eKTD-SFT-KNBL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cb\u003eApplication's:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003e\u003cspan\u003e\u003cb\u003eAll Honda models\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003e\u003cspan\u003e\u003cb\u003eAll Acura models\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015561437,"sku":"KTD-SFT-KNBL","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/7426637933.jpg?v=1766112553"},{"product_id":"k-tuned-driver-side-radiator-hoses-w-optional-fan-switch-bung-k20-or-k24","title":"K-TUNED DRIVER SIDE RADIATOR HOSES W\/ OPTIONAL FAN SWITCH BUNG K20 or K24","description":"\u003cp\u003e\u003cspan\u003eK-Tuned has made some improvements to our popular Driver Side Rad Hoses for K-swaps. After seeing some copies of our original design, we were motivated to bring something new to the table. Our lower hose has been redesigned with a built in port to hold an optional bung for an OEM rad fan switch. This optional port was added so that you no longer need to cut into the hose to install a bulky and ugly aluminum adapter. If you don’t plan to use a fan switch in the hose location, the included plug and clamp will seal the port easily. The plug can also be drilled and tapped for aux. coolant sensors if desired. Note that we still recommend installing the single wire coolant temp gauge sensor in the upper rad hose location. Made from high quality 4-ply silicone, these are designed to work with most 92-00 half size radiators that are relocated to the driver side of the engine bay. These will work with all PRB, PRC and RBC\/RRC intake manifolds.  No more installation headaches or messing around with universal hoses.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cb\u003e\u003cspan style=\"text-decoration: underline;\"\u003eApplications:\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan color=\"#151515\" face=\"Verdana, Geneva, sans-serif\" style=\"color: #151515; font-family: Verdana, Geneva, sans-serif;\"\u003e\u003cspan\u003e\u003cspan\u003eEG, DC2, EK (EKK2 mounts only) with relocated 92-00 Civic half rad and K20A, K20A2, K20A3 or K20Z1 cylinder head.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#151515\" face=\"Verdana, Geneva, sans-serif\" style=\"color: #151515; font-family: Verdana, Geneva, sans-serif;\"\u003e\u003cspan\u003e\u003cspan\u003eK24 option in the drop down menu\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"K20","offer_id":1015563137,"sku":"K92-KIT-D","price":99.99,"currency_code":"USD","in_stock":true},{"title":"K24","offer_id":28687438529,"sku":"K94-KIT-D","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/7426965613.jpg?v=1766112558"},{"product_id":"k-tuned-clutch-line-for-k-swapped-k20-k24-92-00-civic-94-01-integra-eg-ek-dc-ktd-clk-001","title":"K-Tuned Clutch Line for K Swapped K20 K24 92-00 Civic 94-01 Integra EG EK DC KTD-CLK-001","description":"\u003cp\u003eDesigned to fit K-swapped cars perfectly, this fully stainless steel clutch line with SS fittings comes complete with all the adapters needed for both outlet sizes found on oem Honda clutch master cylinders.  This way, no matter what master cylinder you have, our clutch line will fit.  It also has properly angled fittings on both ends of the hose for a very clean looking install.  There is a 180 degree fitting on the master cylinder end and a 90 degree fitting on the slave cylinder end.  There will be absolutely no corrosion on this line setup because the hose, adapter fittings, and hose ends are all 100% stainless steel.  This is unlike other competitors clutch line kits where the fittings are simply zinc plated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart\u003c\/strong\u003e # KTD-CLK-001\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e EG, DC2, EK\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015563881,"sku":"KTD-CLK-001","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/ktd-clk-001-f8354cf35e91bf2e692d5a0a879291374ae48cc0.png?v=1769031476"},{"product_id":"k-tuned-stainless-steel-clutch-line-kit-b-series-d-series-ktd-clk-bs","title":"K-tuned STAINLESS STEEL CLUTCH LINE KIT - B-SERIES D-SERIES KTD-CLK-BS","description":"\u003cp\u003e\u003cspan\u003eDesigned to fit B-series and D-Series cars perfectly, this fully stainless steel clutch line with SS fittings comes complete with all the adapters needed for both outlet sizes found on oem Honda clutch master cylinders. This way, no matter what master cylinder you have, our clutch line will fit. It also has properly angled fittings on both ends of the hose for a very clean looking install. There is a 180 degree fitting on the master cylinder end and a 45 degree fitting on the slave cylinder end. There will be absolutely no corrosion on this line setup because the hose, adapter fittings, and hose ends are all 100% stainless steel. This is unlike other competitors clutch line kits where the fittings are simply zinc plated.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan color=\"#151515\" face=\"Verdana, Geneva, sans-serif\" style=\"color: #151515; font-family: Verdana, Geneva, sans-serif;\"\u003e\u003cspan\u003e\u003cb\u003eApplications\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cb\u003e:\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan color=\"#151515\" face=\"Verdana, Geneva, sans-serif\" style=\"color: #151515; font-family: Verdana, Geneva, sans-serif;\"\u003e\u003cspan\u003eAll B and D series \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015564893,"sku":"KTD-CLK-BS","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/33735603716274.jpg?v=1766112560"},{"product_id":"k-tuned-clutch-line-k-series-engine-swap-in-rhd-eg-ek-dc-right-hand-drive-only-ktd-clk-rhd","title":"K Tuned Clutch Line K Series Engine Swap in RHD EG EK DC Right Hand Drive Only KTD-CLK-RHD","description":"\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e EG, DC2, EK ( with RHD)\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDesigned to fit K-swapped cars perfectly, this fully stainless steel clutch line with SS fittings comes complete with all the adapters needed for both outlet sizes found on oem Honda clutch master cylinders.  This way, no matter what master cylinder you have, our clutch line will fit.  It also has properly angled fittings on both ends of the hose for a very clean looking install.  There is a 180 degree fitting on the master cylinder end and a 90 degree fitting on the slave cylinder end.  There will be absolutely no corrosion on this line setup because the hose, adapter fittings, and hose ends are all 100% stainless steel.  This is unlike other competitors clutch line kits where the fittings are simply zinc plated.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015565537,"sku":"KTD-CLK-RHD","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/7427227757.jpg?v=1766112562"},{"product_id":"k-tuned-universal-1-25-inline-billet-thermostat-housing-w-stant-thermostat-kwp-th-251","title":"K Tuned Universal 1.25\" Inline Billet Thermostat Housing w\/ Stant Thermostat","description":"\u003cp\u003e\u003cspan\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eThis part is most often used in conjunction with our K-Tuned Water Pump Block Off Plate kit.  Installation of the Water Plate kit deletes the factory T-stat housing so if you need or want to have a T-stat in your cooling system you'll need to use this part for sure.  This billet thermostat housing is designed to splice the thermostat into the lower hose of your K-series cooling system.  Fits standard 1.25' rad hoses and comes complete with a new 180 deg Stant T-stat.  Machined billet aluminum finish only.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e\u003cspan style=\"line-height: 19.5px;\"\u003e\u003cstrong\u003ePart\u003c\/strong\u003e # KWP-TH-251\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e\u003cspan style=\"line-height: 19.5px;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan color=\"#151515\" face=\"Arial\" size=\"2\" style=\"color: #151515; font-family: Arial; font-size: small;\"\u003e\u003cspan\u003eK-Series Engines\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan color=\"#151515\" face=\"Arial\" size=\"2\" style=\"color: #151515; font-family: Arial; font-size: small;\"\u003e\u003cspan\u003eUniversal w\/ 1.25\" rad hose\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015606605,"sku":"KWP-TH-251","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/20277565391026.jpg?v=1766112563"},{"product_id":"k-tuned-10an-hi-flow-inline-fuel-filter-universal-ktd-mff-010","title":"K-TUNED 10AN HI-FLOW INLINE FUEL FILTER UNIVERSAL KTD-MFF-010","description":"\u003ch4 data-start=\"522\" data-end=\"612\"\u003e\u003cstrong data-start=\"527\" data-end=\"610\"\u003eK-Tuned 10AN High-Flow Inline Fuel Filter – E85, Alcohol \u0026amp; Race Fuel Compatible\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp data-start=\"613\" data-end=\"692\"\u003e\u003cstrong data-start=\"613\" data-end=\"692\"\u003ePart Number: KTD-MFF-010 | Universal Fit for K-Series \u0026amp; Custom Fuel Systems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"694\" data-end=\"975\"\u003eUpgrade your fuel system with the \u003cstrong data-start=\"728\" data-end=\"773\"\u003eK-Tuned 10AN High-Flow Inline Fuel Filter\u003c\/strong\u003e, engineered for \u003cstrong data-start=\"790\" data-end=\"816\"\u003ehigh-horsepower builds\u003c\/strong\u003e and \u003cstrong data-start=\"821\" data-end=\"847\"\u003erace-fuel applications\u003c\/strong\u003e. Designed with performance and reliability in mind, this filter is compatible with \u003cstrong data-start=\"931\" data-end=\"947\"\u003ealcohol, E85\u003c\/strong\u003e, and all common race fuels.\u003c\/p\u003e\n\u003cp data-start=\"977\" data-end=\"1149\"\u003eWhether you're building a street machine or a full race car, this filter is built to protect your injectors and deliver consistent fuel flow for \u003cstrong data-start=\"1122\" data-end=\"1148\"\u003e500+ horsepower setups\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr data-start=\"1151\" data-end=\"1154\"\u003e\n\u003ch3 data-start=\"1156\" data-end=\"1180\"\u003e\u003c\/h3\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015608981,"sku":"KTD-MFF-010","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/ktd-mff-010-ca70a9c3fafee816725c930df89dab7b427fca8d.png?v=1769033099"},{"product_id":"k-tuned-billet-rsx-shifter-base-plate-for-integra-dc2-94-01-civic-ef-eg-ek-88-00","title":"K-Tuned Billet RSX Shifter Base Plate for Integra DC2 94-01 Civic EF EG EK 88-00","description":"\u003cp\u003e\u003cspan face=\"Arial\" size=\"2\" style=\"font-family: Arial; font-size: small;\"\u003eThe K-Tuned Billet Shifter Base Plate is designed to install an RSX  Type-S or comparable shifter box without cutting a hole in the exhaust  tunnel of the chassis. This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle,  keeping it closer to the driver and the steering. It also leaves a lot  more room below the car for large exhaust systems. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Shifter Base Plate was designed to route your shifter cables inside the car. Generally users set them up to exit through the heater hose hole  in the firewall. Note that we assuming that the heater core has been  deleted on most race cars. We also want users to be aware that this  shifter setup does not clear any interior panels or center consoles on  any chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eP\/N\u003c\/strong\u003e: KTD-BIL-SHP\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: 1994-2001 Acura Integra, 1988-2000 Honda Civic\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: Shift box not included. Will not work with interior center console plastic.\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015617945,"sku":"KTD-BIL-SHP","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/23950945419442.jpg?v=1766112569"},{"product_id":"k-tuned-all-in-one-vss-converter-k-swap-k20-k24-ktd-sc-aio","title":"K-Tuned All-In-One VSS Converter K Swap K20 K24 KTD-SC-AIO","description":"\u003cspan\u003eThe K-Tuned All-In-One Adjustable VSS Converter was designed to merge all of our original VSS units into one simple and easy to use programmable speed correction unit. By connecting the unit via USB to any Windows based computer or laptop and using a very simple downloaded computer application you can select from the following 3 settings to accurately adjust and calibrate your speed signal: 1) RSX setting - Converts 05+ VSS signal to 02-04 specs. 2) S2K setting - Corrects speed only for S2K cluster swaps. NOTE: The RSX and S2K settings are preset for swap cars with 23” tall tire (size 205\/50R15) and are still adjustable a further 25% +\/- for very accurate speedo calibration. 3) General - No initial correction is made. You can enter any correction value desired up to 25% +\/- The K-Tuned AIO-VSS Converter is wired into the engine harness on the interior of the car near the ecu where it is safe from the outside elements. Wiring is also simple, with only 4 wires to connect: power, ground, speed signal input and speed signal output. The converter comes complete with a detachable plug in harness and a separate USB harness which allows the unit to be easily removed from the car and connected to a computer for programming. We also include detailed installation and programming instructions.\u003c\/span\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1015651041,"sku":"KTD-SC-AIO","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/7295841075309.jpg?v=1766112570"},{"product_id":"k-tuned-94-01-integra-92-95-civic-k-swap-conversion-harness-k20a-k20a2-k24-kth-eg-dc2","title":"K-Tuned (94-01) Integra (92-95) Civic K-Swap Conversion Harness K20A K20A2 K24 KTH-EG-DC2","description":"\u003cp\u003eWe stepped into the wiring market for a reason.  To release what we feel is the highest quality and easiest to install conversion harness available.  We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered.  Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\n\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car.  It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly.  Functions like the fuel pump, tach, speedo, starter signal, \u003cspan class=\"caps\"\u003eO2\u003c\/span\u003e sensors, etc.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install.  The harness is constructed with quality mil-spec spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection.  Our harnesses come complete with installation instructions and a very cool wire cutter \/ stripper tool.  The end result is a very high quality conversion harness at the best possible price.  Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart\u003c\/strong\u003e # KTH-EG-DC2\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eApplication's:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e (94-01) Integra\u003c\/p\u003e\n\u003cp\u003e (92-95) Civic \u003c\/p\u003e\n\u003cp\u003e (93-97) Honda Civic Del Sol\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1021167405,"sku":"KTH-EG-DC2","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/57_8.JPG?v=1618238733"},{"product_id":"k-tuned-1996-1998-ek-civic-k-swap-conversion-harness-k20a-k20a2-k24-kth-96-98-kth-96-98","title":"K-Tuned 1996-1998 EK Civic K-Swap Conversion Harness K20A K20A2 K24 KTH-96-98 KTH-96-98","description":"\u003cp\u003eWe stepped into the wiring market for a reason.  To release what we feel is the highest quality and easiest to install conversion harness available.  We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered.  Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\n\u003cp\u003eA K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car.  It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly.  Functions like the fuel pump, tach, speedo, starter signal, \u003cspan class=\"caps\"\u003eO2\u003c\/span\u003e sensors, etc.\u003c\/p\u003e\n\u003cp\u003eThe K-Tuned harness is 99% plug and play and takes very little time to install.  The harness is constructed with quality mil-spec spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection.  Our harnesses come complete with installation instructions and a very cool wire cutter \/ stripper tool.  The end result is a very high quality conversion harness at the best possible price.  Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e\n\u003cp\u003ePart # KTH-96-98\u003c\/p\u003e\n\u003cp\u003eAppliction: 96-98 Honda Civic \u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1021178029,"sku":"KTH-96-98","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/57_9_2df7a00f-696a-4751-a65a-12545673974b.JPG?v=1504754957"},{"product_id":"k-tuned-inline-universal-high-flow-fuel-filter-8an-ktd-mff-808","title":"K-Tuned Inline (UNIVERSAL) High Flow Fuel Filter -8AN KTD-MFF-808","description":"\u003cp\u003e\u003cspan\u003eHard anodized finish can be used with all fuels including alcohol, E85 and other race fuels.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eA good fuel filter is an important part of any fuel system. They are in place to filter out any potential debris or contaminents before they reach the fuel injectors. K-Tuned High-Flow Fuel Filters are available in 2 different size options that will meet the fuel demands from simple street cars to all out race cars. They are made with 6061 aluminum and suitable for use with alcohol, E85 and all other race fuels. The 2 important features that make this possible are the hard anodized body and the high quality stainless steel mesh filters. The female o-ring ports are easily connected to any size fuel line using standard AN port adapters. Each filter comes with a 100 micron filter but we also have a 30 micron filter available for specific applications where finer filtering is either wanted or necessary. If you are using an aftermarket fuel pump be sure to check the pump manufacturers specs for filter micron ratings. The 8AN size filter measures 1.25\" in diameter and 3.5\" in length . The 10AN size filter measures 2\" in diameter and 5.5\" in length. Note that these overall length measurments do not include the adapters at each end. Port adapters are available separately from K-Tuned. Below is a general HP guide to help you with filter selection. Note that the fuel pump and injectors being used plus the line size need to be taken into account and can increase these potential HP numbers. These are just posted as a basic guideline.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan color=\"#151515\" face=\"Verdana, Geneva, sans-serif\" style=\"color: #151515; font-family: Verdana, Geneva, sans-serif;\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eHigh Flow 8AN Inline Filter (KTD-MFF-808) - 300- 500 HP approx. \u003c\/span\u003e\u003cspan color=\"#151515\" face=\"Verdana, Geneva, sans-serif\" style=\"color: #151515; font-family: Verdana, Geneva, sans-serif;\"\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eApplications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eAll K-series engines, Universal\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1021275237,"sku":"KTD-MFF-808","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/57_2_f207e63a-a729-4aa8-bbde-6a3a2c95a667.JPG?v=1504755509"},{"product_id":"k-tuned-billet-shifter-stops-ktd-sft-stps","title":"K-Tuned Billet Shifter Stops KTD-SFT-STPS","description":"\u003cp\u003e\u003cspan\u003eK-Tuned Billet Shift Stops are now available for our popular Billet RSX Shifter. These stops were designed to prevent over-shifting during race inspired gear changes. Over-shifting is a problem that can cause damage such as stretched or broken shift cables, worn or broken shift selector parts and even damage to the transmission gears and shift forks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith our stops mounted in place, they will physically “stop” the shift lever from over extending past the gears and prevent potential damage to all these parts. K-Tuned Billet Shift Stops come in a 2 piece set with all hardware included. They are constructed using strong 6061 billet aluminum and are fully adjustable to accommodate OEM and aftermarket shifter cables.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease note that K-Tuned Billet Shift Stops can only be mounted on our K-Tuned Billet RSX Shifter, which has a set of threaded holes on the top section that are used to mount the stops in place.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePart \u003c\/strong\u003e# \u003cspan id=\"product_id\"\u003eKTD-SFT-STPS\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e: Must be used with K-tuned Billet RSX shifter\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eNotes: Shifter box not included and sold separately\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1043779461,"sku":"KTD-SFT-STPS","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/ktd-sft-stps-dd78da1ca40364c6bed2c9302e57fb7395246b2e.png?v=1769032107"},{"product_id":"k-tuned-shifter-box-bushings-ktd-sft-bus","title":"K-tuned Shifter Box Bushings KTD-SFT-BUS","description":"\u003cp\u003e\u003cspan\u003eSecurely mounts any of the above K-Series shifter boxes. The OEM bushings are rubber, this upgrade takes away any movement when mounting your shifter box.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart\u003c\/strong\u003e # \u003cspan id=\"product_id\"\u003eKTD-SFT-BUS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cspan\u003e 2002-2006 RSX (All Models), 2002-2005 Civic SI (EP3), 2001-2005 Civic (ES1\/EM2) 2004-2008 TSX\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1043782101,"sku":"KTD-SFT-BUS","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/ktd-sft-bus-89b456f94b99e9145d0ab52c3bc7da9a10073fff.png?v=1769029198"},{"product_id":"k-tuned-ek-99-00-civic-k-swap-conversion-harness-kth-99-00","title":"K-Tuned EK (99-00) CIVIC K-SWAP CONVERSION HARNESS KTH-99-00","description":"\u003cp class=\"store_normal\"\u003eWe stepped into the wiring market for a reason.  To release what we feel is the highest quality and easiest to install conversion harness available.  We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered.  Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003e A K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car.  It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly.  Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003e The K-Tuned harness is 99% plug and play and takes very little time to install.  The harness is constructed with quality mil-spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection.  Our\u003ca name=\"_GoBack\"\u003e\u003c\/a\u003e harnesses come complete with installation instructions.  The end result is a very high quality conversion harness at the best possible price.  Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003ePart # \u003cstrong\u003e\u003cspan id=\"product_id\"\u003eKTH-99-00\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003eApplication: 99-00 Honda Civic \u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1044917013,"sku":"KTH-99-00","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/7799177325.jpg?v=1766112592"},{"product_id":"k-tuned-swap-packages-level-1-civic-2001-2005-ksp-01-em2","title":"K-Tuned Swap Packages - Level 1 - Civic - 2001-2005 - KSP-01-EM2","description":"\u003cp\u003eK-Tuned has created a series of swap packages that contain everything needed to get your K-swap project completed.It’s all available in one place, K-Tuned.\u003c\/p\u003e\r\n\u003cp\u003eThe parts in our packages have been placed in a particular order, showing what we install first and last when we do a swap in our shop facility. You can start with our “Swap Basics” package and add more parts later on as you need them. This is perfect for guys who are planning to spread their build out over time. Of course, you could also take the plunge and order our “Full Turn Key Swap” package. It contains everything you’ll need for your swap from start to finish. The only thing you need to provide is the motor. We’ve done the rest. So, are you ready to swap Honda’s greatest engine into your car?\u003c\/p\u003e\r\n\u003cp\u003eAs with anything you buy from K-Tuned we offer all our customers \u003cspan class=\"caps\"\u003eFREE\u003c\/span\u003e tech support via phone and email. We will happily guide you through your entire swap if needed to make sure you are happy with the parts you have purchased from us. A K-Tuned Representative will be contacting you to confirm and assist you with your swap package order. Please make sure to include a contact phone number in your customer information.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePART#\u003c\/strong\u003e KSP-01-EM2\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAPPLICATIONS:\u003c\/strong\u003e 01-05 Honda Civic (ALL)\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1070440017,"sku":"KSP-01-EM2","price":1599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/8084488301.jpg?v=1766112725"},{"product_id":"k-tuned-passenger-side-radiator-kit-honda-civic-acura-integra-eg-ek-dc2-k20-krp-c26-03","title":"K-Tuned Passenger Side Radiator Kit Honda Civic Acura Integra EG EK DC2 K20","description":"\u003cp\u003e\u003cspan\u003eIt took a couple years for us to design what we feel is the best K-series swap radiator available.  Looking at current \u0026amp; past designs and their flaws, we finally came up with a rad design that meets our high standards.  Our K-swap experience showed us that rad installs have usually required relocated rad brackets or modification to the rad itself.  Not anymore!  The K-Tuned Passenger  radiator drops right into the oem passenger side location and requires zero modifications to make it fit.  The kit includes our high quality aluminum rad, a set of our custom fitted hoses, SS T-bolt clamps, and a slim design rad fan with mounting ties.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePart\u003c\/strong\u003e # KRP-C26-03\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEG, EK, DC2 K swaps\u003cspan\u003e with EKK2 Mounts and have K20A, K20A2, K20A3 or K20Z1 cylinder head.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e* Does NOT fit K20Z3 \/ K24 style head (Coolant port on the side of the head)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"98%\" border=\"0\" cellspacing=\"0\" cellpadding=\"2\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\" class=\"item\" colspan=\"2\"\u003e\n\u003ctable width=\"100%\" class=\"alternative\" border=\"0\" cellspacing=\"0\" cellpadding=\"5\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"item\"\u003e\n\u003cdiv itemprop=\"description\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote: If you are using EKK1 mounts please contact us for fitment issues you may have before purchase.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":7835602092062,"sku":"KRP-C26-03","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/23720538865842.png?v=1766112733"},{"product_id":"k-tuned-em2-01-05-civic-k-swap-conversion-harness-kth-01-05","title":"K-TUNED-EM2 (01-05) CIVIC K-SWAP CONVERSION HARNESS KTH-01-05","description":"\u003cp class=\"store_normal\"\u003eWe stepped into the wiring market for a reason.  To release what we feel is the highest quality and easiest to install conversion harness available.  We’ve used several of our competitor’s harnesses and in short, we felt the need to make several improvements based on the flaws we encountered.  Just like every other K-Tuned product, they don’t leave our hands unless we feel that it is a top quality part that we would use on our own personal cars.\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003e A K-swap conversion harness is a must-have part for any K-series engine swap. The harness is required to join up the factory K-series engine harness to the factory dash harness of the swapped car.  It is designed integrate the K-series ecu and all of the related electrical functions get them operating properly.  Functions like the fuel pump, tach, speedo, starter signal, O2 sensors, etc.\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003e The K-Tuned harness is 99% plug and play and takes very little time to install.  The harness is constructed with quality mil-spec, oem colored wire and finished with a nice clean looking mil-spec nylon sleeving for protection.  Our\u003ca name=\"_GoBack\"\u003e\u003c\/a\u003e harnesses come complete with installation instructions.  The end result is a very high quality conversion harness at the best possible price.  Several applications are available so get yours to make sure your K-swap is wired up right!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e 2001-2005 EM2 Civic\u003c\/p\u003e\n\u003cp class=\"store_normal\"\u003e\u003cstrong\u003ePart# \u003cspan id=\"product_id\"\u003eKTH-01-05\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1096488653,"sku":"KTH-01-05","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/9087811693.jpg?v=1766112744"},{"product_id":"k-tuned-88-91-civic-crx-traction-bar-w-b-engine-mount-8891-tb-109","title":"K-Tuned 88-91 CIVIC \/ CRX TRACTION BAR (W\/ B ENGINE MOUNT) 8891-TB-109","description":"\u003cp\u003e\u003cspan\u003eThese bars are the strongest K-Tuned makes and the best in the industry. We use only the best high-grade steel and chromoly in the construction and the strongest hardware money can buy. These bars are designed for high hp street and track dedicated cars.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eB-Series engine mount provides an extra strong support from the bar to the engine to stop the engine from rocking around in the engine bay during hard launches. Will only fit with B-Series engines (B16 B17 B18 etc)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEngineered from extensive track testing and racing, K-Tuned Racing Traction bars are developed to improve traction and handling. K-Tuned Racing Traction Bars bolts on to your factory tow hook mounting locations. We don’t just sell these bars we use them on our race cars.\u003cbr\u003e\u003cbr\u003eComponents are CNC machined and laser cut from 1\/4\" steel and finished with a durable powder coating. The radius arms are thick walled polished aluminum to ensure a strong and solid arm to prevent from fatigue and breakage. With the versatility of the radius arms, fitment is perfect every time and adjustability is only a twist away. The Main bar is made from \u003cspan\u003eChromoly\u003c\/span\u003e and the end plates from the best high-grade steel available.\u003cbr\u003e\u003cbr\u003e- Full Bolt on installation\u003cbr\u003e- Eliminates Front Crash mount which is not needed and reduces overall weight\u003cbr\u003e- Perfect for Street cars\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKey Features:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eB-Series engine mounts, kit works only with B-Series motor swaps\u003c\/li\u003e\n\u003cli\u003ePro Series Gen 3 Bars, fully new design to completely eliminate any failures\u003c\/li\u003e\n\u003cli\u003eAluminum Swaged radius arms (stronger and better)\u003c\/li\u003e\n\u003cli\u003eTig and Mig welded for the best strength\u003c\/li\u003e\n\u003cli\u003eNew double rod end (heim joints) on each end of the radius arm\u003c\/li\u003e\n\u003cli\u003eControl arm mounting tabs\u003c\/li\u003e\n\u003cli\u003eFull mounting hardware package included\u003c\/li\u003e\n\u003cli\u003eNew ultra tough powder coating, the strongest and thickest ever\u003c\/li\u003e\n\u003cli\u003eNew high quality packaging so it gets to you in tip top condition!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e88-91 Civic EF\u003c\/li\u003e\n\u003cli\u003e88-91 CRX\u003c\/li\u003e\n\u003cli\u003eB-Series motor swapped cars only\u003c\/li\u003e\n\u003cli\u003eDoes not work with factory full-sized radiator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart # \u003c\/strong\u003e\u003cspan id=\"product_id\"\u003e8891-TB-109\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Yes $159.99 \/ Yes $14.99 \/ Yes $40.00","offer_id":1096586757,"sku":"8891-TB-109","price":409.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/9088204909.jpeg?v=1766112746"},{"product_id":"k-tuned-electric-water-pump-pump-only-k-series-k20-k24-ktd-wtr-pmp","title":"K-Tuned Electric Water Pump (Pump Only) K Series K20 K24 KTD-WTR-PMP","description":"This is a replacement water pump for the K-Tuned Water Plate kit(KWP-PKFJ-204).\r\n\u003cp\u003e*Note, water pump provides 20 gallons per minute flow rating\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"font-weight: bold;\"\u003eApplications\u003c\/span\u003e: K-Tuned Water Plate, may fit other applications. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePart Number: \u003c\/strong\u003e\u003cspan id=\"product_id\" style=\"display: inline; visibility: visible;\"\u003eKTD-WTR-PMP\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":44312409112754,"sku":"KTD-WTR-PMP","price":216.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/23644396421298.jpg?v=1766112747"},{"product_id":"k-tuned-billet-oil-cap-for-honda-acura-ktd-olc-blk-black","title":"K-Tuned Billet Oil Cap for Honda\/ Acura-  KTD-OLC-BLK Black","description":"\u003cp\u003eAfter a countless number of requests, the K-Tuned Billet Oil Cap is now available. Note right away that this oil cap is not just specific to the K-Series engine, we are fairly certain that it will fit all Honda engines. For a design, we weren’t trying to reinvent the wheel here, so we kept things very simple. Starting with 6061 billet aluminum blank, we threaded the bottom, machined a groove for an o-ring seal, cut out the center and placed 7 moon cuts around the outer circumference for grip when loosening or tightening. The cap is then fully polished and finished in your choice of 5 anodized colors: black, silver, red, blue, and gold. The last step is done by you, choose and apply one of the two included K logo center stickers in black or silver. Installing the sticker after you put the cap on your valve cover will keep our K logo sitting perfectly straight. This oil cap will finish off any Honda engine bay. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e All Honda engines (Confirmed: B, D, F, H, J and K-Series)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart Number: \u003c\/strong\u003eKTD-OLC-BLK\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Black","offer_id":1097561321,"sku":"KTD-OLC-BLK","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/ktd-olc-blk-2ff4a6879126fccffcc2e4926c8ec0be2b461a5a.png?v=1769032014"},{"product_id":"k-tuned-water-plate-to-electric-pump-hose-kit-kwp-ftgs-209","title":"K-Tuned WATER PLATE TO ELECTRIC PUMP HOSE KIT KWP-FTGS-209","description":"\u003cp\u003e\u003cspan\u003eIf you are using a K-Tuned Water Pump Block Off Plate Kit you might want to pick up this 12AN hose and fitting kit.  The hose kit runs from the water plate to the inlet of the electric water pump.  The kit includes two 90 degree 12AN hose end fittings and 2' of 12AN hose. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e\u003cspan\u003e Please note pictures are not of exact item and product received may be different.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cspan\u003e To be used with the K-Tuned Water Pump Block Off Plate\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePart #: \u003c\/strong\u003e\u003cspan id=\"product_id\"\u003eKWP-FTGS-209\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1097863081,"sku":"KWP-FTGS-209","price":54.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/9105866861.jpg?v=1766112756"},{"product_id":"k-tuned-immobilizer-multiplexor-bypass-unit-k-swap-k20-k24-kid-001","title":"K-Tuned Immobilizer \/ Multiplexor Bypass Unit K Swap K20 K24 KID-001","description":"\u003cp data-start=\"328\" data-end=\"412\"\u003e\u003cstrong data-start=\"328\" data-end=\"412\"\u003eK-Tuned Immobilizer \u0026amp; Multiplexor Bypass Unit – K-Swap ECU Integration (KID-001)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"414\" data-end=\"752\"\u003eSimplify your \u003cstrong data-start=\"428\" data-end=\"451\"\u003eK20\/K24 engine swap\u003c\/strong\u003e with the \u003cstrong data-start=\"461\" data-end=\"510\"\u003eK-Tuned Immobilizer \/ Multiplexor Bypass Unit\u003c\/strong\u003e, part number \u003cstrong data-start=\"524\" data-end=\"535\"\u003eKID-001\u003c\/strong\u003e. Specifically designed for use with \u003cstrong data-start=\"572\" data-end=\"611\"\u003e2001–2004 Honda\/Acura K-series ECUs\u003c\/strong\u003e, this module disables the factory immobilizer and multiplexor system, allowing your ECU to function properly in non-OEM or swapped vehicles.\u003c\/p\u003e\n\u003cp data-start=\"754\" data-end=\"901\"\u003ePerfect for \u003cstrong data-start=\"766\" data-end=\"788\"\u003eK-swap enthusiasts\u003c\/strong\u003e, this easy-to-install unit is a \u003cstrong data-start=\"821\" data-end=\"851\"\u003ecost-effective alternative\u003c\/strong\u003e to expensive reprogramming or custom ECU options.\u003c\/p\u003e\n\u003cp data-start=\"903\" data-end=\"923\"\u003e🔧 \u003cstrong data-start=\"906\" data-end=\"923\"\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"924\" data-end=\"1317\"\u003e\n\u003cli data-start=\"924\" data-end=\"996\"\u003e\n\u003cp data-start=\"926\" data-end=\"996\"\u003eCompatible with K-series ECUs: \u003cstrong data-start=\"957\" data-end=\"994\"\u003ePLM, PLR, PND, PNF, PRA, PRB, PPA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"997\" data-end=\"1067\"\u003e\n\u003cp data-start=\"999\" data-end=\"1067\"\u003e\u003cstrong data-start=\"999\" data-end=\"1039\"\u003eEliminates immobilizer \u0026amp; multiplexor\u003c\/strong\u003e issues in swapped chassis\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1068\" data-end=\"1132\"\u003e\n\u003cp data-start=\"1070\" data-end=\"1132\"\u003eSimple \u003cstrong data-start=\"1077\" data-end=\"1095\"\u003e4-wire install\u003c\/strong\u003e with included \u003cstrong data-start=\"1110\" data-end=\"1130\"\u003eT-tap connectors\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1133\" data-end=\"1189\"\u003e\n\u003cp data-start=\"1135\" data-end=\"1189\"\u003eIncludes \u003cstrong data-start=\"1144\" data-end=\"1156\"\u003eECU pins\u003c\/strong\u003e for clean and fast integration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1190\" data-end=\"1254\"\u003e\n\u003cp data-start=\"1192\" data-end=\"1254\"\u003eReliable, plug-and-play performance with no reflash required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1255\" data-end=\"1317\"\u003e\n\u003cp data-start=\"1257\" data-end=\"1317\"\u003eCompact design for easy mounting in your engine bay or cabin\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1319\" data-end=\"1418\"\u003e⚙️ \u003cstrong data-start=\"1322\" data-end=\"1338\"\u003ePart Number:\u003c\/strong\u003e KID-001\u003cbr data-start=\"1346\" data-end=\"1349\"\u003e 🚗 \u003cstrong data-start=\"1352\" data-end=\"1418\"\u003eFits all Honda\/Acura K20\/K24 swaps using compatible 01–04 ECUs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1420\" data-end=\"1581\"\u003eUpgrade your \u003cstrong data-start=\"1433\" data-end=\"1450\"\u003eK-series swap\u003c\/strong\u003e with confidence. The \u003cstrong data-start=\"1472\" data-end=\"1495\"\u003eK-Tuned Bypass Unit\u003c\/strong\u003e saves you time, hassle, and money—without compromising on reliability or performance.\u003c\/p\u003e\n\u003chr data-start=\"828\" data-end=\"831\"\u003e\n\u003ch3 data-start=\"833\" data-end=\"865\"\u003e\u003c\/h3\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1097879221,"sku":"KID-001","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/6894100480109.jpg?v=1766112757"},{"product_id":"k-tuned-valve-cover-breather-filter-integra-civic-rsx-k-swap-k20-k20a-k20z-k24a","title":"K-TUNED VALVE COVER BREATHER FILTER Integra Civic RSX K-swap K20 K20A K20Z K24a","description":"\u003cp\u003e\u003cspan\u003eUse this valve cover breather filter to keep warm, oil saturated crankcase vapors from re-entering your engine through the intake pipe.  Allowing crankcase vapour to re-enter the engine hurts performance and leaves a nasty oily residue all over the inside surface of the intake manifold.  To prevent this, you can delete the factory valve cover vent hose and replace it with our breather filter. Sold individually with a clamp to hold it in place.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cspan\u003e All K-series engines\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e KTD-VC-VENT\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1100285757,"sku":"KTD-VC-VENT","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/ktd-vc-vent-4ac102cc86fb07b5111e2ce981dee0a96127dbcb.png?v=1769026533"},{"product_id":"k-tuned-iacv-hardware-cleaning-kit-ktd-iac-ck","title":"K-Tuned IACV HARDWARE \/ CLEANING KIT  KTD-IAC-CK","description":"\u003cp data-start=\"268\" data-end=\"329\"\u003e\u003cstrong data-start=\"268\" data-end=\"329\"\u003eK-Tuned IACV Hardware \u0026amp; Cleaning Kit – Part #: KTD-IAC-CK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"331\" data-end=\"613\"\u003eMake cleaning your Idle Air Control Valve (IACV) easier with this handy bolt replacement kit from K-Tuned. Designed to replace those hard-to-remove tamper-proof bolts on your K-Series throttlebody’s IACV motor, this kit allows quick and easy disassembly for maintenance or cleaning.\u003c\/p\u003e\n\u003chr data-start=\"615\" data-end=\"618\"\u003e\n\u003ch3 data-start=\"620\" data-end=\"638\"\u003e⚙️ Features:\u003c\/h3\u003e\n\u003cul data-start=\"639\" data-end=\"933\"\u003e\n\u003cli data-start=\"639\" data-end=\"707\"\u003e\n\u003cp data-start=\"641\" data-end=\"707\"\u003eReplaces factory tamper-proof bolts with standard hex head bolts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"708\" data-end=\"756\"\u003e\n\u003cp data-start=\"710\" data-end=\"756\"\u003eSimplifies IACV removal and cleaning process\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"757\" data-end=\"848\"\u003e\n\u003cp data-start=\"759\" data-end=\"848\"\u003eCompatible with all \u003cstrong data-start=\"779\" data-end=\"820\"\u003ecable-driven K-Series throttle bodies\u003c\/strong\u003e equipped with IACV motors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"849\" data-end=\"888\"\u003e\n\u003cp data-start=\"851\" data-end=\"888\"\u003eHigh-quality hardware built to last\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"889\" data-end=\"933\"\u003e\n\u003cp data-start=\"891\" data-end=\"933\"\u003eDesigned to make maintenance hassle-free\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"935\" data-end=\"938\"\u003e\n\u003ch3 data-start=\"940\" data-end=\"960\"\u003e✅ Application:\u003c\/h3\u003e\n\u003cul data-start=\"961\" data-end=\"1026\"\u003e\n\u003cli data-start=\"961\" data-end=\"1026\"\u003e\n\u003cp data-start=\"963\" data-end=\"1026\"\u003eFits all cable-driven K-Series throttlebodies with IACV motor\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1028\" data-end=\"1031\"\u003e\n\u003cp data-start=\"1033\" data-end=\"1100\"\u003e\u003cstrong data-start=\"1033\" data-end=\"1100\"\u003eKeep your K-Series running smooth with easier IACV maintenance!\u003c\/strong\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1100353065,"sku":"KTD-IAC-CK","price":7.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/9142075501.png?v=1766112765"},{"product_id":"k-tuned-3-silicone-coupler-kt-sc-300","title":"K-tuned 3' SILICONE COUPLER KT-SC-300","description":"\u003cp data-start=\"244\" data-end=\"311\"\u003e\u003cstrong data-start=\"244\" data-end=\"311\"\u003eK-Tuned 3\" Silicone Coupler – 3 Feet Length (Part #: KT-SC-300)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"313\" data-end=\"548\"\u003eUpgrade your intake or turbo setup with this \u003cstrong data-start=\"358\" data-end=\"398\"\u003ehigh-quality, 4-ply silicone coupler\u003c\/strong\u003e from K-Tuned. Designed for durability and flexibility, this coupler is perfect for joining two 3\" tubing pieces, providing a secure, leak-proof seal.\u003c\/p\u003e\n\u003chr data-start=\"550\" data-end=\"553\"\u003e\n\u003ch3 data-start=\"555\" data-end=\"573\"\u003e⚙️ Features:\u003c\/h3\u003e\n\u003cul data-start=\"574\" data-end=\"828\"\u003e\n\u003cli data-start=\"574\" data-end=\"653\"\u003e\n\u003cp data-start=\"576\" data-end=\"653\"\u003e\u003cstrong data-start=\"576\" data-end=\"618\"\u003eHeavy-duty 4-ply silicone construction\u003c\/strong\u003e for strength and heat resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"654\" data-end=\"686\"\u003e\n\u003cp data-start=\"656\" data-end=\"686\"\u003eFlexible and easy to install\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"687\" data-end=\"757\"\u003e\n\u003cp data-start=\"689\" data-end=\"757\"\u003ePerfect for use with \u003cstrong data-start=\"710\" data-end=\"755\"\u003eK-Tuned intakes or universal applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"758\" data-end=\"792\"\u003e\n\u003cp data-start=\"760\" data-end=\"792\"\u003eLength: 3 feet (approx. 91 cm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"793\" data-end=\"828\"\u003e\n\u003cp data-start=\"795\" data-end=\"828\"\u003eInner Diameter: 3 inches (76mm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"830\" data-end=\"833\"\u003e\n\u003ch3 data-start=\"835\" data-end=\"856\"\u003e✅ Applications:\u003c\/h3\u003e\n\u003cul data-start=\"857\" data-end=\"981\"\u003e\n\u003cli data-start=\"857\" data-end=\"915\"\u003e\n\u003cp data-start=\"859\" data-end=\"915\"\u003eIdeal for turbo, intercooler, and intake piping setups\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"916\" data-end=\"981\"\u003e\n\u003cp data-start=\"918\" data-end=\"981\"\u003eCompatible with a wide range of aftermarket performance parts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"983\" data-end=\"986\"\u003e\n\u003cp data-start=\"988\" data-end=\"1075\"\u003eUpgrade your engine bay with this reliable and durable silicone coupler from K-Tuned!\u003c\/p\u003e\n\u003cp data-start=\"1077\" data-end=\"1132\"\u003e\u003cstrong data-start=\"1077\" data-end=\"1132\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1100373657,"sku":"KT-SC-300","price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/kt-sc-300-7fa741413e6f34969856b48b63a36b2f659f4aee.png?v=1769033218"},{"product_id":"k-tuned-throttle-body-velocity-coupler-ktd-tvc-623","title":"K Tuned THROTTLE BODY VELOCITY COUPLER KTD-TVC-623","description":"\u003cp\u003eThe K-Tuned velocity coupler is made from reinforced 4-ply silicone. This unique part completely removes the step commonly found at the throttle body opening, which straightens and accelerates the intake airflow and in turn helps the engine breathe easier.\u003c\/p\u003e\n\u003cp\u003eIntake system design and overall airflow into an engine can be critical to making maximum power. The coupler has been engineered to improve an engines volumetric efficiency similar to the way a velocity stack works. Other examples of improving airflow include port matching and tapering throttle bodies. When using a regular silicone intake coupler it always leaves a step at the throttle body opening, which slows airflow and causes turbulence. By installing the K-Tuned coupler, air turbulence is eliminated and the taper will help to increase the intake air velocity.\u003c\/p\u003e\n\u003cp\u003eThis will fit the most commonly used 3” intakes on the market. One end is custom fitted to the OEM 62.5mm K-series throttle body (cable versions) and the other end matches up to a 3” diameter intake pipe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications: \u003c\/strong\u003eK20A, K20A2, K20A3 \u0026amp; K20Z1 Throttle bodies\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e \u003cspan id=\"product_id\"\u003eKTD-TVC-623\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1100450181,"sku":"KTD-TVC-623","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/9142304877.jpg?v=1766112763"},{"product_id":"k-tuned-velocity-stacks-combo-ktd-vst","title":"K-Tuned VELOCITY STACKS \u0026 COMBO KTD-VST","description":"\u003cp\u003e\u003cspan\u003eV-Stack combo includes: V-Stack (3\" or 3.5\") V-Stack Filter, Silicone Coupler, and Clamps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications: \u003c\/strong\u003eAny 3\" Intake\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart # \u003c\/strong\u003eKTD-VST\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Please Choose","offer_id":1103807825,"sku":"KTD-VST","price":94.99,"currency_code":"USD","in_stock":true},{"title":"V-Stack Combo 3","offer_id":1103807829,"sku":"KTD-VST-KTD-VST-C30","price":99.99,"currency_code":"USD","in_stock":true},{"title":"V-Stack Combo 3.5","offer_id":1103807833,"sku":"KTD-VST-KTD-VST-C35","price":94.99,"currency_code":"USD","in_stock":true},{"title":"Filter Only (-40.00)","offer_id":1103807845,"sku":"KTD-AF-6","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/9172844653.jpg?v=1766112766"},{"product_id":"k-tuned-hose-separator-ktd-hs-06","title":"K-Tuned HOSE SEPARATOR KTD-HS-06","description":"\u003cdiv\u003eSeparate two hoses running side-by side with these handcuff style hose separators.\u003c\/div\u003e\n\u003cdiv\u003eAvailable in 6AN 8An and 10AN, in black anodized finish.\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cspan\u003e: All\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #\u003c\/strong\u003e  \u003cspan id=\"product_id\"\u003eKTD-HS-06\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"-6 AN","offer_id":1103823965,"sku":"KTD-HS-06","price":7.69,"currency_code":"USD","in_stock":true},{"title":"Default Title","offer_id":1103823969,"sku":"KTD-HS-08","price":8.24,"currency_code":"USD","in_stock":true},{"title":"-10AN (+2.00)","offer_id":1103823973,"sku":"KTD-HS-10","price":8.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/9173008493.jpg?v=1766112768"},{"product_id":"k-tuned-pair-fuel-rail-adapters-8an-to-6an-for-k-tuned-fuel-rails-honda-k20-k24","title":"K-TUNED Pair Fuel Rail Adapters 8AN to 6AN for K-Tuned Fuel Rails Honda K20 K24","description":"\u003cp\u003eThese 8AN to 6AN adapter fittings feature a full-flow tapered shape on the port side of the fitting to improve fuel flow.   Inlet fitting size 8AN.  Outlet fitting size 6AN male.  These adapters can be used on most fuel rails with 8AN o-ring inlet ports.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold in pairs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cspan\u003e for use with all K-Tuned fuel rails.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #: \u003c\/strong\u003eKR-FRF-303\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1103829421,"sku":"KR-FRF-303","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/kr-frf-303-8e74480bcbc0b90ddbbe316f91a34f408bb6e677.jpg?v=1772570625"},{"product_id":"k-tuned-center-port-fitting-for-fuel-rail-6an-or-8an-kr-cen-0","title":"K-Tuned CENTER PORT FITTING FOR FUEL RAIL (6AN OR 8AN) KR-CEN-0","description":"\u003cp\u003e\u003cspan\u003eHere is another optional fitting that can be used with our K-Tuned Fuel Rail.  Available in 6AN or 8AN, the center port fitting can be used as either a feed or return depending on the fuel demands of the engine being used.  Show and all motor cars with up to 300 whp will like the clean look this fitting gives because the fuel feed line can be hidden or 'tucked' for super clean looking engine bay.  Turbo setups have used this third port for a return line to the FPR when both ends of the rail are used in a duel feed system.  Anodized black finish with 2 O-rings included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUSE WITH K-TUNED FUEL RAIL ONLY\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cspan\u003e For use with K-Tuned fuel rails only\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #: \u003c\/strong\u003eKR-CEN-0\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"-6","offer_id":1103851489,"sku":"KR-CEN-06","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Default Title","offer_id":1103851493,"sku":"KR-CEN-08","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/kr-cen-06-f782055228956bec68e0995643fdca932580e4d6.jpg?v=1769477875"},{"product_id":"k-tuned-center-mount-fuel-pressure-gauge-w-fitting-kr-fit-cmfg","title":"K-Tuned CENTER MOUNT FUEL PRESSURE GAUGE (W\/ FITTING) KR-FIT-CMFG","description":"\u003cp\u003e\u003cspan\u003eK-Tuned has designed a one piece fitting that uses the existing center port on our rail to properly mount the fuel gauge in the center of our rail just below the K-Tuned logo.  The resulting look is very clean, compact and is very easy to install.  The fitting is soft mounted on the underside of the rail with o-rings, to eliminate the possibility of dangerous fuel leaks caused by the vibration of the engine unlike other rails where the gauge is hard mounted.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003ePart #: \u003cspan id=\"product_id\"\u003eKR-FIT-CMFG\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Fitting + Gauge Combo","offer_id":37522491670706,"sku":"KR-FIT-CMFG","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Fitting Only (-$20.00)","offer_id":32067840245869,"sku":"KR-FIT-ONLY","price":29.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/14912250446002.jpg?v=1766112775"},{"product_id":"k-tuned-fuel-line-kit-for-oem-filter-6an-civic-integra-k-series-flk-of-lo","title":"K-Tuned Fuel Line Kit (For OEM Filter) -6AN Civic Integra K-Series FLK-OF-LO","description":"\u003cp\u003eThis basic fuel line kit is designed to work with the OEM fuel filter located on the firewall and aftermarket fuel rail.  The kit includes our pre-assembled fuel lines, Honda banjo adapter fitting for the fuel filter, K-Tuned 6AN wrench and clamp.  This kit is perfect for people who have already purchased an aftermarket FPR and fuel rail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: The fuel pressure regulator (FPR) must be mounted on the driver side shock tower in front of the brake master cylinder for proper fitment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cstrong\u003eAll K-Tuned Fuel Line Kits now feature K-Tuned branded fittings.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eApplications: \u003c\/strong\u003e\u003cspan\u003eEG, DC2, EK with K Series Engine\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #: \u003c\/strong\u003eFLK-OF-LO\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1103941433,"sku":"FLK-OF-LO","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/15462078120114.jpg?v=1766112776"},{"product_id":"k-tuned-6an-center-feed-fuel-line-kit-w-inline-filter-k-swap-honda-acura-k20","title":"K-TUNED 6AN CENTER FEED FUEL LINE KIT W\/ INLINE FILTER K-SWAP HONDA ACURA K20","description":"\u003cp data-start=\"336\" data-end=\"455\"\u003e\u003cstrong data-start=\"336\" data-end=\"431\"\u003eK-Tuned 6AN Center Feed Fuel Line Kit with Inline Filter – K-Swap – Honda \/ Acura EG EK DC2\u003c\/strong\u003e\u003cbr data-start=\"431\" data-end=\"434\"\u003e \u003cstrong data-start=\"434\" data-end=\"455\"\u003ePart #: FLK-CF-LO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"457\" data-end=\"807\"\u003eUpgrade your K-Swap fuel system with the \u003cstrong data-start=\"498\" data-end=\"539\"\u003eK-Tuned 6AN Center Feed Fuel Line Kit\u003c\/strong\u003e, designed specifically for use with K-Tuned’s center feed fuel rails and an inline fuel filter. Built with high-quality AN fittings and pre-assembled braided lines, this kit ensures a clean install and reliable fuel delivery for your Honda or Acura K-swapped vehicle.\u003c\/p\u003e\n\u003chr data-start=\"809\" data-end=\"812\"\u003e\n\u003ch3 data-start=\"814\" data-end=\"838\"\u003e🔧 \u003cstrong data-start=\"821\" data-end=\"838\"\u003eKey Features:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-start=\"840\" data-end=\"1143\"\u003e\n\u003cli data-start=\"840\" data-end=\"897\"\u003e\n\u003cp data-start=\"842\" data-end=\"897\"\u003e✅ \u003cstrong data-start=\"844\" data-end=\"875\"\u003eIncludes Inline Fuel Filter\u003c\/strong\u003e for clean fuel flow\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"898\" data-end=\"973\"\u003e\n\u003cp data-start=\"900\" data-end=\"973\"\u003e✅ \u003cstrong data-start=\"902\" data-end=\"934\"\u003ePre-Assembled 6AN Fuel Lines\u003c\/strong\u003e for a quick \u0026amp; leak-free installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"974\" data-end=\"1023\"\u003e\n\u003cp data-start=\"976\" data-end=\"1023\"\u003e✅ \u003cstrong data-start=\"978\" data-end=\"1021\"\u003eIncludes K-Tuned 6AN AN Wrench \u0026amp; Clamps\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1024\" data-end=\"1076\"\u003e\n\u003cp data-start=\"1026\" data-end=\"1076\"\u003e✅ \u003cstrong data-start=\"1028\" data-end=\"1074\"\u003eAll lines and fittings are K-Tuned branded\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1077\" data-end=\"1143\"\u003e\n\u003cp data-start=\"1079\" data-end=\"1143\"\u003e✅ \u003cstrong data-start=\"1081\" data-end=\"1143\"\u003eIdeal for EG, EK, DC2 chassis with K20 or K24 engine swaps\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1145\" data-end=\"1148\"\u003e\n\u003ch3 data-start=\"1150\" data-end=\"1185\"\u003e⚙️ \u003cstrong data-start=\"1157\" data-end=\"1185\"\u003eImportant Fitment Notes:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-start=\"1187\" data-end=\"1447\"\u003e\n\u003cli data-start=\"1187\" data-end=\"1260\"\u003e\n\u003cp data-start=\"1189\" data-end=\"1260\"\u003eThis kit is designed for use with a \u003cstrong data-start=\"1225\" data-end=\"1258\"\u003eK-Tuned center feed fuel rail\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1261\" data-end=\"1337\"\u003e\n\u003cp data-start=\"1263\" data-end=\"1337\"\u003eRequires an \u003cstrong data-start=\"1275\" data-end=\"1320\"\u003eaftermarket fuel pressure regulator (FPR)\u003c\/strong\u003e (not included)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1338\" data-end=\"1447\"\u003e\n\u003cp data-start=\"1340\" data-end=\"1447\"\u003eFPR must be mounted on the \u003cstrong data-start=\"1367\" data-end=\"1396\"\u003edriver’s side shock tower\u003c\/strong\u003e, near the brake master cylinder for proper fitment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1449\" data-end=\"1452\"\u003e\n\u003ch3 data-start=\"1454\" data-end=\"1478\"\u003e📦 \u003cstrong data-start=\"1461\" data-end=\"1478\"\u003eKit Includes:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-start=\"1480\" data-end=\"1653\"\u003e\n\u003cli data-start=\"1480\" data-end=\"1528\"\u003e\n\u003cp data-start=\"1482\" data-end=\"1528\"\u003eK-Tuned 6AN pre-assembled braided fuel lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1529\" data-end=\"1551\"\u003e\n\u003cp data-start=\"1531\" data-end=\"1551\"\u003eInline fuel filter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1552\" data-end=\"1586\"\u003e\n\u003cp data-start=\"1554\" data-end=\"1586\"\u003e6AN wrench for secure fittings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1587\" data-end=\"1602\"\u003e\n\u003cp data-start=\"1589\" data-end=\"1602\"\u003eHose clamps\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1603\" data-end=\"1653\"\u003e\n\u003cp data-start=\"1605\" data-end=\"1653\"\u003eK-Tuned brand fittings for perfect compatibility\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1655\" data-end=\"1658\"\u003e\n\u003ch3 data-start=\"1660\" data-end=\"1692\"\u003e🚗 \u003cstrong data-start=\"1667\" data-end=\"1692\"\u003eVehicle Applications:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul data-start=\"1694\" data-end=\"1865\"\u003e\n\u003cli data-start=\"1694\" data-end=\"1732\"\u003e\n\u003cp data-start=\"1696\" data-end=\"1732\"\u003e1992–1995 Honda Civic (EG chassis)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1733\" data-end=\"1771\"\u003e\n\u003cp data-start=\"1735\" data-end=\"1771\"\u003e1996–2000 Honda Civic (EK chassis)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1772\" data-end=\"1813\"\u003e\n\u003cp data-start=\"1774\" data-end=\"1813\"\u003e1994–2001 Acura Integra (DC2 chassis)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1814\" data-end=\"1865\"\u003e\n\u003cp data-start=\"1816\" data-end=\"1865\"\u003eCompatible with K20 and K24 K-Series Engine Swaps\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1867\" data-end=\"1870\"\u003e\n\u003cp data-start=\"1872\" data-end=\"2159\"\u003eThis is a \u003cstrong data-start=\"1882\" data-end=\"1915\"\u003emust-have fuel system upgrade\u003c\/strong\u003e for K-swapped Hondas and Acuras. With everything you need to route clean fuel through a center feed rail setup, the \u003cstrong data-start=\"2032\" data-end=\"2080\"\u003eK-Tuned 6AN Fuel Line Kit with Inline Filter\u003c\/strong\u003e provides performance, quality, and clean engine bay aesthetics in one package.\u003c\/p\u003e\n\u003cp data-start=\"2161\" data-end=\"2248\"\u003e📦 \u003cstrong data-start=\"2164\" data-end=\"2248\"\u003eShips fast with tracking from an authorized K-Tuned dealer. Buy with confidence.\u003c\/strong\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1103960033,"sku":"FLK-CF-LO","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/28536443142322.jpg?v=1766112778"},{"product_id":"k-tuned-6an-oem-fuel-system-lines-rail-fpr-gauge-wrench-flk-of-blk","title":"K-Tuned 6AN OEM FUEL SYSTEM (LINES\/RAIL\/FPR\/GAUGE\/WRENCH) FLK-OF-BLK","description":"\u003cp\u003eAgain, this kit is designed to work with the OEM fuel filter located on the firewall.  This is a complete K-swap fuel system, which includes pre-assembled fuel lines, K-Tuned fuel rail, K-Tuned FPR with gauge, K-Tuned 6AN wrench and clamp.  Buy everything together and save a few dollars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: The fuel pressure regulator (FPR) must be mounted on the driver side shock tower in front of the brake master cylinder for proper fitment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cspan\u003e EG, DC2, EK with K Series Engine\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #: \u003c\/strong\u003eFLK-OF\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Black","offer_id":1103984205,"sku":"FLK-OF-BLK","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":1103984209,"sku":"FLK-OF-SIL","price":494.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":1103984213,"sku":"FLK-OF-RED","price":549.99,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":1103984217,"sku":"FLK-OF-BLU","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/flk-of-blk-c76ac0096a62d2918b6a8e47ad3ba8bffd40c066.png?v=1769032762"},{"product_id":"k-tuned-header-flange-kbh-fl-502","title":"K-Tuned HEADER FLANGE KBH-FL-502","description":"\u003cp\u003e\u003cspan\u003eThis 100% Stainless Steel 3-bolt flange is the mate to all K-Tuned header outlet flanges.  It simplifies header installation by giving you a flange that will match our headers perfectly.  You can choose to modify your existing exhaust piping to work with your swap, or fabricate your own exhaust system from the header back for custom applications.  The flange features a nice cut-out along the inside edge so you can slip your exhaust pipe into the flange, then weld it for a strong, leak-free connection with no flow restrictions.  Most flanges are simply designed to be butt welded to the pipe.  However, butt welding can lead to overlapping, where the pipe is not flowing perfectly straight through the flange connection.  There will be no overlapping problems with this well-designed flange.  Sold individually here, please note that the flange can be added to any K-Tuned header purchase for only $10.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003cspan\u003e Designed to be used with any K-Tuned headers\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePart #: \u003c\/strong\u003eKBH-FL-502\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1105243153,"sku":"KBH-FL-502","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/9223700589.jpg?v=1766112781"},{"product_id":"k-tuned-oem-thermostat-housing-plug-bracket-khp-pg-310","title":"K-Tuned OEM THERMOSTAT HOUSING PLUG \u0026 BRACKET KHP-PG-310","description":"\u003cp\u003e\u003cspan\u003eSome of you may be interested in deleting the heater hoses and core from your K-swapped vehicle.  The K-Tuned T-stat plug and bracket allows you to remove the oem heater hose pipe and properly block off the opening that is left behind.  The o-ring sealed plug is a perfect fit and the special hold down bracket will make certain that the plug stays in place.  Ugly looped hoses are no longer needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e \u003cspan\u003e All K-series engines\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #: \u003c\/strong\u003e\u003cspan id=\"product_id\"\u003eKHP-PG-310\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"Default Title","offer_id":1128797521,"sku":"KHP-PG-310","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/products\/26171910619314.jpg?v=1766112890"},{"product_id":"k-tuned-heater-outlet-plug-for-k20a-a2-z1-cyl-head-khp-pg-302","title":"K-Tuned HEATER OUTLET PLUG (FOR K20A\/A2\/Z1 CYL. HEAD) KHP-PG-302","description":"\u003cp\u003e\u003cspan\u003eSome of you may be interested in deleting the heater hoses and heater core from your K-swapped vehicle.  The K-Tuned Heater outlet plug is made from zinc plated steel and allows removal of the OEM heater hose fitting found on the exhaust side on some K-series cylinder heads.  For installation, simply remove the OEM pipe fitting and replace it with our K-Tuned plug for a nice clean look.  The plug comes with a new crush washer to prevent any coolant leaks.  Ugly looped heater hoses are no longer needed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications: \u003c\/strong\u003eK-series cylinder heads (w\/ heater hose fitting beside the header)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart #: \u003c\/strong\u003e\u003cspan id=\"product_id\"\u003eKHP-PG-302\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: Coolant Temp Sensor Not Included\u003c\/span\u003e\u003c\/p\u003e","brand":"K-Tuned","offers":[{"title":"No","offer_id":3264863937,"sku":"KHP-PG-302","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":28375644545,"sku":"KHP-PG-302\/ KTD-CTS","price":36.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0223\/2067\/files\/khp-pg-302-e9d1b2fe57321e4e6e598dfdcd64cd4969666a1c.png?v=1769028695"}],"url":"https:\/\/www.hptautosport.com\/collections\/k-tuned-1.oembed?page=47","provider":"HPTautosport","version":"1.0","type":"link"}